Learn about Brake Safety Week 2024, a crucial part of CVSA’s Operation Airbrake Program, focusing on brake maintenance to reduce commercial vehicle crashes.
Introduction
Brake Safety Week is an integral part of the Commercial Vehicle Safety Alliance (CVSA) Operation Airbrake Program. In collaboration with the Federal Motor Carrier Safety Administration (FMCSA) and the Canadian Council of Motor Transport Administrators, this initiative aims to decrease crashes caused or worsened by defective brake systems on commercial vehicles. This is achieved through comprehensive roadside inspections to identify and remove unsafe vehicles from the roads. Success in this initiative also relies heavily on law enforcement agencies’ efforts to educate drivers, carriers, mechanics, and owner-operators about the importance of proper brake maintenance, operation, and performance.
When is Brake Safety Week and What is Its Focus?
Brake Safety Week 2024 is scheduled to occur from August 25-31. During this period, inspectors will prioritize identifying brake lining and pad violations. While these components are regularly inspected under the North American Standard Inspection Program, this year’s special emphasis on brake linings and pads highlights their critical role in vehicle safety and fitness. Issues with these parts can lead to violations and impact a carrier’s safety rating significantly.
Brake-related violations are the most common reasons for vehicles being taken out of service during inspections. FMCSA’s 2023 data reveals that six of the top 20 vehicle violations were brake-related. Additionally, during the previous year’s CVSA International Roadcheck, brake-system violations accounted for 25.2% of all vehicle out-of-service violations during the three-day inspection blitz. Examples of out-of-service brake violations include broken brake drums, loose air tanks, corroded holes in spring brake housings, and inoperative tractor protection valves.
Why is Regular Brake Maintenance Crucial?
Regular brake maintenance is essential for ensuring the safety and functionality of commercial vehicles. It should be performed routinely, typically during each oil change. Key maintenance tasks include:
- Replacing Brake Parts: Change brake pads and linings as needed to maintain optimal performance.
- Greasing Slack Adjusters: Regularly grease slack adjusters to prevent them from seizing.
- Checking Air Compressor Pressure Gauge: Ensure the gauge reads above 60 PSI when off and between 100 and 125 PSI when running.
- Inspecting Hoses and Linings: Hoses and linings should be in good condition, free from cracks or leaks, and at least one-fourth of an inch thick.
For additional tips, refer to the following flyer: CVSA 2024 Brake Safety Week Flyer.
Results of the 2023 Brake Safety Week
In 2023, inspectors in Canada, Mexico, and the U.S. conducted 18,875 inspections during Brake Safety Week. Of these, 12.6% of commercial vehicles were taken out of service for brake-related violations. Specific findings included:
- 12.4% with Steering Axle Brake Violations
- 47.5% with Standalone Brake Violations
- 58.7% Failing the 20% Defective Brakes Criterion
For detailed results, visit: CVSA 2023 Brake Safety Week Results.
Tips for Truck Drivers to Prepare for Brake Safety Week
Preparation is key to ensuring compliance and safety during Brake Safety Week. Here are some essential tips for truck drivers:
Preparation
- Educate Yourself and Your Drivers: Familiarize yourself with FMCSA brake regulations and maintenance tips. Utilize CVSA resources such as checklists available at CVSA Brake Inspection Checklist.
- Ensure Paperwork is Ready: Make sure all necessary documentation, including driver’s license and vehicle registration, is readily available for inspection.
Inspection Knowledge
Understand what inspectors will be looking for, including:
- Loose or Missing Parts
- Air or Hydraulic Fluid Leaks
- Worn Linings, Pads, Drums, or Rotors
- Faulty Brake-System Components
- ABS Indicator Lights
Pre-Trip Checks
Conduct thorough pre-trip inspections to check for:
- Leaks and Examine Brake Shoes: Look for loose hoses and listen for air leaks.
- Low Air Signals: Ensure all signals function correctly.
- Air Disc Brake Rotors: Inspect for cracks.
- Brake Linings: Verify they are thick and free of excessive wear.
Repairs
Fix any issues found during pre-trip inspections to avoid unexpected problems and potential out-of-service orders.
Frequently Asked Questions
What is Brake Safety Week? Brake Safety Week is an annual initiative by the CVSA, FMCSA, and Canadian Council of Motor Transport Administrators to reduce crashes caused by defective brake systems on commercial vehicles through roadside inspections and education.
When is Brake Safety Week 2024? Brake Safety Week 2024 will occur from August 25-31.
Why are brake linings and pads the focus in 2024? Brake linings and pads are critical to vehicle safety and fitness, and this year’s emphasis underscores their importance in preventing violations and improving safety ratings.
What are common brake-related violations? Common violations include broken brake drums, loose air tanks, corroded holes in spring brake housings, and inoperative tractor protection valves.
How often should brake maintenance be performed? Brake maintenance should be performed regularly, typically during each oil change, to ensure optimal performance and safety.
Where can I find more information on brake inspections? For more information, refer to resources like the CVSA 2024 Brake Safety Week Flyer and the CVSA Brake Inspection Checklist.
Conclusion
Brake Safety Week is a crucial event for promoting the safety and reliability of commercial vehicles on the road. By understanding the focus areas, maintaining regular brake inspections, and adhering to FMCSA regulations, drivers and carriers can significantly reduce the risk of brake-related violations and enhance overall road safety. Preparing for Brake Safety Week 2024 involves not just compliance, but a commitment to continuous education and maintenance to ensure that every journey is as safe as possible.